Cisco 897 Config Wizard for New Zealand

IFM supplies network engineering services for $NZ200+GST per hour. If you require assistance with designing or engineering a Cisco network - hire us!

Note: This page uses client side Javascript. It does not transmit any information entered to IFM.

Page Last Modified: 8 January 2016

Router: 897 ,
ISP Username: , Password:
Router host name: , Domain Name:
Router's Ethernet IP: . . . , Router's Local Netmask: 255.255.255.0
Your Email Address: , Your Company:
Service Provider: Typical ADSL using PPPoA VDSL using VLAN10 and PPPoE UFB using VLAN10 and PPPoE UFB using no VLAN tag and PPPoE UFB using VLAN10 and DHCP
Management Username:
Management Password:
Enable Password:
Enable DHCP Enable IPv6 using 6to4

Enable Site to Site IPSec VPN
AES + SHA 3DES + SHA 3DES + MD5 IKEv1 (classic) IKEv2 (next generation crypto)
Remote Router's Public IP Address: . . .
Remote Router's Ethernet IP: . . .
Pre-shared key (IPSec password):
If you have ActiveDirectory then forward queries for the domain to your AD controller: . . .

Enable Client to Site IPSec VPN (using Cisco VPN Client)/EasyVPN Server
Remote network to assign to VPN clients: . . .1-254
VPN Group Name:
VPN Group Key:

Enable remote management via telnet/SSH
IP Address you want to do management from: . . .

Port forward traffic to internal servers
NAT SMTP traffic to: . . .
NAT HTTPS traffic to: . . .
NAT RDP traffic to: . . .